Is your Siemens VFD showing Fault F0001? Don’t Panic.
If you are a maintenance engineer, seeing the F0001 fault code on your Siemens Sinamics G120 or Micromaster 440 drive can be a nightmare. It means “Overcurrent” – the drive is detecting more current than allowed, and it has tripped to protect itself.
Here is a quick guide to troubleshooting and fixing this issue.
What Causes Fault F0001?
- Motor Issues: Short circuit in the motor winding or ground fault.
- Cable Issues: The cable connecting the VFD to the motor is damaged or too long.
- Mechanical Load: The motor is trying to pull a load that is too heavy (jammed conveyor, stuck pump).
- VFD Failure: The power card or IGBT inside the VFD is damaged.
Step-by-Step Solution:
Step 1: Check the Motor & Cable
- Disconnect the motor cable from the VFD.
- Check the motor insulation resistance (Megger test).
- Check for any cuts or burns in the cable.
Step 2: Check the Load
- Rotate the motor shaft manually. Is it stuck?
- Check if the gearbox or machine is jammed.
Step 3: Check the VFD (Important)
- Run the VFD without the motor connected.
- If the F0001 fault still appears even with no motor, then your VFD Hardware (IGBT) is damaged.
⚠️ Is Your VFD Damaged? Do Not Wait!
Repairing an old VFD can take weeks and often fails again. The best solution is to replace it immediately to minimize production downtime.
JRM Solutions has ready stock of Siemens Sinamics G120, V20, and Micromaster Drives in Noida/Delhi NCR.
- 100% Original Siemens Products
- Best Wholesale Prices in India
- Immediate Delivery (Same Day Dispatch)
👉 Click Here to Buy Siemens VFD: https://jrmsolutions.net/shop/
📞 Call for Technical Support & Price: +91 87663 35023 📧 Email: sales3@jrmsolutions.net
